60leds/m digital led tape SMD5050 RGBW 3535 3528 2835 External IC ws2904 2811 UCS1903 DMX addressable led strips. 
It comes in 5 meters per reel with a3 Pin JST SM connector on both end and separated Power / Ground Wires . Customized length is workable.

1.Standard DMX512 protocol, compatible with Artnet and Madrix, no need decoder.

2. 60LEDs/M .12V low voltage inputted , don’t over 13V , otherwise you will destroy the entire strip .

3. Date + and Date- for signal transfer

4. Flexible PCB material . Each 3 LEDs can be cut , there is cut lines every 50mm.

5. 12mm width PCB , 0.25mm thickness with 3M tape back side for non-weatherproof version . 14.5mm width , 4mm thickness with silicon tube for waterproof version .

6. This DMX strip also can be produced in DC24V with 60leds/10 pixels/M.

7. The DMX strip is not auto-addressable, you have to write the DMX address code by DMX address writer/DMX controller.

8. Control IC DMX512 mounted on PCB, one IC control 3 leds, every 3leds as segement. supporting numerous color-change effects.

9. SD card controller, DMX controller, Artnet, Arduino, etc.

Application:

1.cars, corridor, staricase, furniture, show windows, and other decorative outline;

2.bars, KTV, cafes stages and other entertainning places atmosphere rendering;

3.salons, handicrafts and other high-end counter lighting;

4.amusement park thearter&aircraft cabin mood lighting;

5.emergency hallway lighting, auditorium walkway lighting, stairway exit lighting, concealed lighting.